Domoticz setup

Domoticz is an open source home automation system. It can be used to monitor and control various devices such as lights, switches, alarm system, camera, etc...
Domoticz proposes to create scenarios that will trigger an event, depending on conditions.
It is compatible with many devices, from different vendors.


More information can be found on https://domoticz.com/ 

As I already have a Raspberry Pi running Raspbian, I will use it to run Domoticz.

Domoticz installation:

I presume that you already have a Raspberry Pi, running Raspian Jessie Lite, and with SSH enable.

To install Domoticz, simply type:  
sudo curl -L install.domoticz.com | sudo bash

More info can be found at: https://www.domoticz.com/wiki/Installing_and_running_Domoticz_on_a_Raspberry_PI

During the installation, it will ask you which port you want to use for HTTP and HTTPS access. Ports by default are 8080 and 443.  It can be changed, as well as the installation folder.

Once Domoticz is installed, to see the web interface, just type http://Raspberry_IP:8080 from  a web browser. If everything is fine, you should see this: